GoPro Hero 3D

GoPro Hero 3D

Thanks to stereographer, Tim Maupin for the head's up on this. 

GoPro39s 3D Hero case is the high-tech version of taping a pair of cameras together for stereoscopic vision.jpeg

I love these little Hero cams. They just create such a unique and dynamic perspective. In this era where jaded viewers have seen it all, I think the Hero cam definitely creates an interesting point of view that isn't part of the usual visual vocabulary. Though I'm not sure the measured distance, this upcoming 3D config sports a pretty tiny Inter-Ocular (IO) seperation so busting eye balls isn't going to be nearly as much of an issue as with other side by side camera setups. It looks like the IO is fixed in the 2 camera housing but hopefully at some point they'll make a housing that will allow the separation to be adjusted. This setup looks like a fun and inexpensive way for people to begin seriously experimenting with stereoscopic images. 

http://ces.cnet.com/8301-32254_1-20027589-283.html

The upcoming LCD BacPac for the cameras is awesome as well. This will make them so much easier to work with though I admit it's kind of fun to not know what you shot until you load it into your system. It's kind of a nice surprise like getting dailies back from the lab ;)

Small HD DP6 Tease

IMG_6886.jpg
IMG_6911-3-2.jpg
IMG_6908.jpg
IMG_6902.jpg

Small HD DP6 Tease

This is the field monitor I've been waiting for.

http://www.smallhd.com/Products/DP6.html

TINY. Sharp. Rugged. Tons of inputs - Loop-thru 3G-SDI, HDMI (video and PC), Component, and Composite. Tons of power options and accessories. Focus Assist and other clutch features. You can even use it as a computer monitor.

It's about 1300 bucks for the SDI option. So cheap for such a nice tool. 

And Small HD is a great company. Super responsive and results oriented customer service. If you have an issue, these guys work tirelessly to resolve it. If you couldn't tell, I'm extremely pleased with the DP6 and am excited at the speed they're cranking out firmware upgrades and adding features. 

Full on, honest review to follow soon. 

DIY Litepanels Accessory

487072.jpg

DIY Litepanels Accessory

In my opinion, the Litepanels MiniPlus Flood is one of the best lights on the market. It's small and endlessly mountable, very rugged, versatile power options, dimmable with minimal color shift, and pretty darn punchy for a small unit. You can get the complete kit that lets you mount it to a camera or on a stand for about $1000, not cheap but worth every penny. I've found one of the ways I most often use this light is as a backlight or rim light for interview shots. The light isn't quite big and punchy enough to use as an effective key source but it's very even and looks great on the side of someone's face. Because it's a relatively small source though, it needs to be softened up before it starts to look really good. The diffusion gels that come with these lights, because they fit directly on to the face, don't really have much of a softening effect. They'll reduce the quantity and smooth out the beam a bit but if you want to turn this into a genuine soft source, you need to get some space between the head and a larger diffuser. You can set another stand and put a frame of diffusion on it but that means more crap on the floor and if you're traveling light, your stands are probably tied up holding lights. Here's a little DIY solution I came up with to turn this light into a softer source right at the head using a couple of cheap, readily available parts. 

Here's what you need:

parts.jpg

-Dremel Drill (hopefully you don't need to go buy one to make this accessory)

-A couple of 1/4-20 Hotshoe Adapters, $12.95, you'll cannibalize the top nut

-Lowel Tota 10"x12" Gel Frame, $22.95

-6" 1/4-20 Machine Screw, not pictured here, you can get these for about 45 cents 

1. Drill a hole into the mounting arm on the Tota Frame big enough for the 1/4-20 screw to go through

2. Cut the head off the 6" Machine Screw

3. Remove the top nuts from the Hotshoe Adapters

4. Insert the screw into the 1/4-20 receiver on the Litepanels Miniplus unit

5. Put the rest of it together as pictured below and you have a quick and easy way of turning this light into a nice, soft source. It especially makes a pretty rim light in interview situations. 

lp1.jpg
lp3.jpg
lp2.jpg